Request a Quote

Home / Products / DOT Push-In Fittings (Brass)

DOT Push-In Fittings (Brass)

All-brass push-to-connect fittings for nylon air brake tubing: unions, elbows, tees, bulkheads and adapters in the 1562-DOT model system. Brass collet and body, Buna-N seal, stainless tube support — built for repeated service disconnection on truck and trailer air lines.

Features
  • All-brass body and collet
  • Buna-N O-ring seal
  • Stainless steel tube support
  • Push to seat — release for service disconnection
  • The 1562-DOT model system
Applications

Tractor and trailer air lines · valves and air tanks · brake chambers · frame-to-axle runs · dash controls

Compatible tubing

SAE J844 Type A & B nylon air brake tubing, 1/4″–3/4″ O.D.

How to choose in this family

Choose all-brass DOT push-in where you want the 1562-DOT model system in metal: brass body and collet, Buna-N seal, stainless tube support. The selection order is the same as PTC — tube O.D. first (1/4″–3/4″), port thread second (NPTF 1/8″–1/2″), configuration third (union, elbow, tee, bulkhead, adapter). Push-in suits repeated service disconnection on tractor and trailer air lines; for lines that will not be disturbed, the compression families are the mechanical alternative. Working range: 250 psi, −40°F to +200°F.

Category specification — sizes & ranges for this family
Tube / hose sizes1/4″ – 3/4″
ThreadNPTF 1/8″ – 1/2″
Working pressure250 psi
Temperature−40°F to +200°F
StandardBuilt to FMVSS 571.106 · SAE J2494 · for SAE J844 Type A & B nylon tubing
Series1562-DOT · 1564 · 1565 · 1571 · 1572 families

Size table — the variants in this family

Tube-to-tube variants — no thread

Variant (PART# · size)Tube O.D.Working pressureTemperature
1/4″ tube1/4″250 psi−40°F to +200°F
3/8″ tube3/8″250 psi−40°F to +200°F
1/2″ tube1/2″250 psi−40°F to +200°F
5/8″ tube5/8″250 psi−40°F to +200°F
3/4″ tube3/4″250 psi−40°F to +200°F

Threaded variants

Variant (PART# · size)Tube O.D.ThreadWorking pressureTemperature
1/4″ × 1/8 NPTF1/4″1/8 NPTF250 psi−40°F to +200°F
3/8″ × 1/4 NPTF3/8″1/4 NPTF250 psi−40°F to +200°F
1/2″ × 3/8 NPTF1/2″3/8 NPTF250 psi−40°F to +200°F
1/2″ × 1/2 NPTF1/2″1/2 NPTF250 psi−40°F to +200°F

How to read these tables: variants are tabled by structure. Tube-to-tube variants — unions, tees, elbows and the other threadless forms — are listed with tube size, working pressure and temperature only: there is no Thread column, because there is no thread to list. A Thread column appears only on variants that actually carry one — male, female or bulkhead. Pick the row on the product page and that exact size is carried into your inquiry. On the live site, every row also carries its C (wrench flats) and L (overall length) dimensions from the factory drawing, with every column defined on the page; per-model dimension values are WAVE factory-catalogue data, confirmed with your quotation.

One photo = one representative photo per series/type. The photo does not show a specific size — pick the size on the product page and it is carried into your inquiry. The catalogue for this family is listed on the home page under Catalogues — request the current PDF in an inquiry and we send it.

Push in Swivel 90°male Elbow — representative product photo, white backgroundDOT Push-In (Brass)

Push in Swivel 90°male Elbow

Fitting · 1/4″ – 3/4″ · no thread (tube-to-tube)1569SSelect size & inquire →
D.O.T 90° Elbow Adapter — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T 90° Elbow Adapter

Fitting · 1/4″ – 3/4″ · no thread (tube-to-tube)1570Select size & inquire →
D.O.T Male Branch Tee Adapter — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T Male Branch Tee Adapter

Tee · 1/4″ – 3/4″ · no thread (tube-to-tube)1572Select size & inquire →
D.O.T Push In Bulkhead Connector — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T Push In Bulkhead Connector

Bulkhead fitting · 1/4″ – 3/4″ · NPTF 1/8″ – 1/2″1583Select size & inquire →
Push in Connect Fittings Elbow — representative product photo, white backgroundDOT Push-In (Brass)

Push in Connect Fittings Elbow

Fitting · 1/4″ – 3/4″ · no thread (tube-to-tube)1565Select size & inquire →
Push in 90 Degree Male Elbow — representative product photo, white backgroundDOT Push-In (Brass)

Push in 90 Degree Male Elbow

Fitting · 1/4″ – 3/4″ · no thread (tube-to-tube)1569Select size & inquire →
Push-In Male 45° Elbow Pipe — representative product photo, white backgroundDOT Push-In (Brass)

Push-In Male 45° Elbow Pipe

Fitting · 1/4″ – 3/4″ · no thread (tube-to-tube)1554Select size & inquire →
D.O.T Male Swivel Branch Tee Pipe — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T Male Swivel Branch Tee Pipe

Tee · 1/4″ – 3/4″ · no thread (tube-to-tube)1572SSelect size & inquire →
Push InFemale Connector — representative product photo, white backgroundDOT Push-In (Brass)

Push InFemale Connector

Connector · 1/4″ – 3/4″ · NPTF 1/8″ – 1/2″1566Select size & inquire →
D.O.T Push in Fitting Tee — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T Push in Fitting Tee

Fitting · 1/4″ – 3/4″ · no thread (tube-to-tube)1564Select size & inquire →
D.O.T Swivel Run Tee — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T Swivel Run Tee

Tee · 1/4″ – 3/4″ · no thread (tube-to-tube)1571SSelect size & inquire →
D.O.T Fix female Run Tee — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T Fix female Run Tee

Tee · 1/4″ – 3/4″ · no thread (tube-to-tube)Model confirmed at inquirySelect size & inquire →
D.O.T Male 45° Swivel Elbow Adapter — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T Male 45° Swivel Elbow Adapter

Fitting · 1/4″ – 3/4″ · no thread (tube-to-tube)1554SSelect size & inquire →
D.O.T Push In Bulkhead Union — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T Push In Bulkhead Union

Bulkhead fitting · 1/4″ – 3/4″ · NPTF 1/8″ – 1/2″1582Select size & inquire →
D.O.T Push In Union — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T Push In Union

Fitting · 1/4″ – 3/4″ · no thread (tube-to-tube)1562Select size & inquire →
D.O.T Male Run Tee Pipe — representative product photo, white backgroundDOT Push-In (Brass)

D.O.T Male Run Tee Pipe

Tee · 1/4″ – 3/4″ · no thread (tube-to-tube)1571Select size & inquire →