Request a Quote

Home / Products / DOT Push-In Fittings (Brass) / Push in Swivel 90°male Elbow

Push in Swivel 90°male Elbow — representative product photo, full product on white background
DOT Push-In (Brass)

Push in Swivel 90°male Elbow

1569S · Brass / composite programme · Built to FMVSS 571.106 · SAE J2494 · for SAE J844 Type A & B nylon tubing.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Air Brake DOT Fittings1 is a fitting in WAVE's DOT Push-In (Brass) family. It makes the connection its shape is named for in the line run. The all-brass body and collet grip SAE J844 nylon tube over a stainless support, with a Buna-N seal — push in to seal, pull the collet to release for service. It is threadless — its ends take 1/4″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: 250 psi, −40°F to +200°F. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Air Brake DOT Fittings1
Model1569S
FeaturesBrass Collet; Buna N O-ring; Stainless Steel Tube Support; Meets D.O.T. FMVSS571.106; Meets SAE J2494 & SAE J2494-3
MaterialBrass collet, Buna N O-ring, stainless steel tube support
StandardDOT FMVSS571.106; SAE J2494 & SAE J2494-3;Meets D.O.T. FMVSS571.106;Meets SAE J2494 & SAE J2494-3
Compatible tubingSAE J844 Type A & B nylon tubing
Reference Part No.AQ69DOTS - 169PMTNS - 1869 - DQ69DOTS - 1569SDOT

Dimensions are reference data — please confirm at inquiry.

Size table — Air Brake DOT Fittings1

PART#Tube O.D×MALE NPTFCMLE
1569S-D0T-4A1/4×1/83/8.89.887/16
1569S-D0T-4B1/4×1/43/81.07.889/16
1569S-D0T-4C1/4×3/81/21.131.0011/16
1569S-D0T-6A3/8×1/81/2.99.987/16
1569S-D0T-6B3/8×1/41/21.10.989/16
1569S-D0T-6C3/8×3/81/21.14.9811/16
1569S-D0T-6D3/8×1/25/81.461.077/8
1569S-D0T-8B1/2×1/45/81.201.169/16
1569S-D0T-8C1/2×3/85/81.251.1611/16
1569S-D0T-8D1/2×1/25/81.461.167/8
1569S-DOT-10C5/8×3/83/41.231.4011/16
1569S-DOT-10D5/8×1/211/161.641.407/8
1569S-D0T-12D3/4×1/215/162.461.401-1/16
1569S-D0T-12E3/4×3/415/162.461.401-1/16

Dimensions are reference data — please confirm at inquiry.

Features
  • Shaped for the connection its name describes
  • Ends: As photographed — the exact end configuration is confirmed at inquiry — threadless: no thread anywhere on this part
  • The all-brass body and collet grip SAE J844 nylon tube over a stainless support, with a Buna-N seal — push in to seal, pull the collet to release for service.
  • Buna-N O-ring seal
  • This page covers Air Brake DOT Fittings1 (1569S) — select its size above and that exact variant is carried into the inquiry
Applications

Air Brake DOT Fittings1 — It makes the connection its shape is named for in the line run. In WAVE's DOT Push-In (Brass) family it serves: Tractor and trailer air lines · valves and air tanks · brake chambers · frame-to-axle runs · dash controls.

Compatible tubing

For Air Brake DOT Fittings1, the compatible line is: SAE J844 Type A & B nylon air brake tubing, 1/4″–3/4″ O.D.. The exact end configuration is confirmed at inquiry; the family line it serves is as stated.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: the 1562-DOT family is published with AQ62DOT · 62PMT · 1862 · DQ62DOT — check your number in the cross-reference. “Replacement for” describes fit and function only.

Related products — same family

← Back to DOT Push-In Fittings (Brass)