Request a Quote

Home / Guides

DOT Fitting Guides

The technical content US buyers actually search for — written from the standards and the WAVE catalogue, not filler. The live site launches with the two pillar guides below in full, then publishes one DOT guide every week. Open a guide to read it.

Pillar guide

DOT Air Brake Fittings vs DIN 74324: What's Different and How to Choose

Abstract. North American trucks are plumbed to the US DOT system; European trucks to DIN 74324 / ISO 7628. The two systems look alike on a parts wall — brass and composite fittings, nylon tube, push-in and compression joints — but they are built on different tube sizes, different threads and different governing standards, and their fittings are not interchangeable. This guide sets out the differences that matter when you specify, stock or cross a part number from one system to the other.

Read the guide →
Pillar guide

How to Choose DOT Air Brake Fittings: Tube Size, Thread and Configuration

Abstract. Every DOT fitting choice reduces to four decisions, in this order: what tube the line is made of, what size that tube is, what thread the port carries, and what shape the joint has to be. Get them in that order and the model number follows; get them out of order and you quote the wrong part. This guide walks the four decisions and the family choice that comes after them.

Read the guide →

The first 12 weeks of guides — one a week, all DOT

Volume only compounds when the cadence holds and the topic stays on the product. This calendar stays 100% DOT. A week with no finished guide is skipped — filler is never published to fill it.

WeekGuideSupports
1DOT Air Brake Fittings vs DIN 74324: What's Different and How to Choose (pillar, above)Homepage · all categories
2How to Choose DOT Air Brake Fittings: Tube Size, Thread and Configuration (pillar, above)Homepage · all categories
3DOT Push-In Fittings: How They Work, and How to Install ThemDOT Push-In (1562-DOT)
4Compression vs Push-In: Which Fitting for Your Air Line?Compression · DOT Push-In
5SAE J844 Type A vs Type B Nylon Tubing: What Fits Your Air Brake SystemDOT Nylon Tubing
6FMVSS 571.106 Explained: What “Built to Standard” Means for DOT FittingsDOT Push-In · homepage
71562-DOT Push-In Union: Sizes, Threads and Cross-ReferenceDOT Push-In (1562-DOT)
8DOT Nylon Tubing Unions: 1462 Family Sizes and SelectionDOT Nylon Tubing
9Copper vs Nylon Air Brake Tubing: Fittings, Pressure and InstallationDOT Copper Tubing · DOT Nylon Tubing
10SAE J2494 and J2494-3: The Standards Behind DOT Push-In FittingsDOT Push-In (1562-DOT)
11PTC Composite Push-to-Connect Fittings: When Composite Beats BrassPTC & PTCR Composite
12DOT Air Brake Fitting Sizes: Tube OD, NPT Threads and How to Read a Size TableAll categories