- Brass body, nut and sleeve
- Sleeve-and-nut joint — no flaring
- Reusable on copper line repairs
- Widest temperature range of the DOT families
- The 1362–1380 model families
Home / Products / DOT Copper Tubing Fittings
DOT Copper Tubing Fittings
Compression fittings for copper air brake lines on trucks and trailers — unions, elbows, tees and adapters with the sleeve-and-nut joint copper lines have used for decades. The wider temperature range of copper makes this the family for lines near heat sources, such as the compressor discharge line on the tractor.
How to choose in this family
Choose copper-tubing compression for copper air lines — above all where the line runs near heat, such as the compressor discharge line on the tractor, where this family's −65°F to +250°F range earns its place. The sleeve-and-nut joint is the one copper lines have used for decades: mechanical, reusable, no flaring. Tube O.D. 1/4″–3/4″, NPTF 1/8″–1/2″, in the 1362–1380 families. Working range: 150 psi.
| Category specification — sizes & ranges for this family | |
|---|---|
| Tube / hose sizes | 1/4″ – 3/4″ |
| Thread | NPTF 1/8″ – 1/2″ |
| Working pressure | 150 psi |
| Temperature | −65°F to +250°F |
| Standard | Built to FMVSS 571.106 · SAE J246 · for copper air brake tubing |
| Series | 1362 · 1364 · 1366 · 1368 · 1369 · 1371 · 1380 families |
Size table — the variants in this family
Tube-to-tube variants — no thread
| Variant (PART# · size) | Tube O.D. | Working pressure | Temperature |
|---|---|---|---|
| 1/4″ tube | 1/4″ | 150 psi | −65°F to +250°F |
| 3/8″ tube | 3/8″ | 150 psi | −65°F to +250°F |
| 1/2″ tube | 1/2″ | 150 psi | −65°F to +250°F |
| 5/8″ tube | 5/8″ | 150 psi | −65°F to +250°F |
| 3/4″ tube | 3/4″ | 150 psi | −65°F to +250°F |
Threaded variants
| Variant (PART# · size) | Tube O.D. | Thread | Working pressure | Temperature |
|---|---|---|---|---|
| 1/4″ × 1/8 NPTF | 1/4″ | 1/8 NPTF | 150 psi | −65°F to +250°F |
| 3/8″ × 1/4 NPTF | 3/8″ | 1/4 NPTF | 150 psi | −65°F to +250°F |
| 1/2″ × 3/8 NPTF | 1/2″ | 3/8 NPTF | 150 psi | −65°F to +250°F |
| 1/2″ × 1/2 NPTF | 1/2″ | 1/2 NPTF | 150 psi | −65°F to +250°F |
How to read these tables: variants are tabled by structure. Tube-to-tube variants — unions, tees, elbows and the other threadless forms — are listed with tube size, working pressure and temperature only: there is no Thread column, because there is no thread to list. A Thread column appears only on variants that actually carry one — male, female or bulkhead. Pick the row on the product page and that exact size is carried into your inquiry. On the live site, every row also carries its C (wrench flats) and L (overall length) dimensions from the factory drawing, with every column defined on the page; per-model dimension values are WAVE factory-catalogue data, confirmed with your quotation.
DOT Copper TubingAir Brake Copper connector Union
Select size & inquire →
DOT Copper TubingSleeve Tube
Select size & inquire →
DOT Copper TubingAir Brake Tubing Union Tee
Select size & inquire →
DOT Copper TubingCopper tube fitting Short Nut
Select size & inquire →
DOT Copper TubingAir Brake Copper Tubing Female
Select size & inquire →
DOT Copper TubingAir Brake Copper Tubing Male Branch Tee
Select size & inquire →
DOT Copper TubingAir Brake Tubing Male Adapter
Select size & inquire →
DOT Copper TubingAir Brake Copper Male Elbow
Select size & inquire →
DOT Copper Tubing