Request a Quote

Home / Products / DOT Copper Tubing Fittings / Air Brake 90 Degree Elbow Fitting

Air Brake 90 Degree Elbow Fitting — representative product photo, full product on white background
DOT Copper Tubing

Air Brake 90 Degree Elbow Fitting

1365 · Brass / composite programme · Built to FMVSS 571.106 · SAE J246 · for copper air brake tubing.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

DOT Elbow Air Fitting2 is a elbow in WAVE's DOT Copper Tubing family. It turns the line through 90° in a compact body, so a run can change direction in the tight space behind a valve or under a trailer frame. The brass nut and sleeve compress directly onto the copper tube — the traditional sleeve-and-nut joint, reusable when a copper line is repaired. It is threadless — its ends take 1/4″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: 150 psi, −65°F to +250°F. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — DOT Elbow Air Fitting2
Model1365
FeaturesBrass Body; Meets D.O.T. FMVSS571.106 Performance; Meets functional Requirements SAE J246; Reusable; Optional Pre-applied Thread Sealant; Nickel Plated Versions Available for Bio-diesel
MaterialBrass body, nickel plated
StandardDOT FMVSS 571.106; SAE J246 (Ref.SAE No.120201 BA);Meets D.O.T. FMVSS571.106 Performance;Meets functional Requirements SAE J246
Compatible tubingCopper Air Brake Tubing;SAE J844 Type A & B nylon tubing with tube support
Reference Part No.65AB - 1365 - 265A - S265AB

Dimensions are reference data — please confirm at inquiry.

Size table — DOT Elbow Air Fitting2

PART#TUBE SIZEM
1365-41/4.62
1365-63/8.79
1365-81/2.93
1365-105/81.09

*Ref.SAE No.120201 BA

Dimensions are reference data — please confirm at inquiry.

Features
  • Turns the line through 90° in a compact body
  • Ends: Compression tube end (nut & sleeve) × Compression tube end (nut & sleeve) — threadless: no thread anywhere on this part
  • The brass nut and sleeve compress directly onto the copper tube — the traditional sleeve-and-nut joint, reusable when a copper line is repaired.
  • Sleeve-and-nut joint — no flaring
  • This page covers DOT Elbow Air Fitting2 (1365) — select its size above and that exact variant is carried into the inquiry
Applications

DOT Elbow Air Fitting2 — It turns the line through 90° in a compact body, so a run can change direction in the tight space behind a valve or under a trailer frame. In WAVE's DOT Copper Tubing family it serves: Copper air brake lines · compressor discharge lines near heat · tractor engine-bay air lines · legacy copper-plumbed trailers.

Compatible tubing

For DOT Elbow Air Fitting2, the compatible line is: Copper air brake tubing, 1/4″–3/4″ O.D.. Every end of this elbow takes that line directly (1/4″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: the 1371 family is published with 271AB — check your number in the cross-reference. “Replacement for” describes fit and function only.

Related products — same family

← Back to DOT Copper Tubing Fittings