Request a Quote

Home / Products / DOT Push-In Fittings (Brass) / Push InFemale Connector

Push InFemale Connector — representative product photo, full product on white background
DOT Push-In (Brass)

Push InFemale Connector

1566 · Brass / composite programme · Built to FMVSS 571.106 · SAE J2494 · for SAE J844 Type A & B nylon tubing.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

DOT Air Line Connectors1 is a connector in WAVE's DOT Push-In (Brass) family. It connects a line end to its port in one piece, in the form its name describes. The all-brass body and collet grip SAE J844 nylon tube over a stainless support, with a Buna-N seal — push in to seal, pull the collet to release for service. It is made for 1/4″ – 3/4″ tube, with a threaded end in the NPTF 1/8″ – 1/2″ range. Family working range: 250 psi, −40°F to +200°F. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — DOT Air Line Connectors1
Model1566
FeaturesBrass Collet; Buna N O-ring; Stainless Steel Tube Support; Meets D.O.T. FMVSS571.106; Meets SAE J2494 & SAE J2494-3
MaterialBrass collet, Buna N O-ring, stainless steel tube support
StandardDOT FMVSS571.106; SAE J2494 & SAE J2494-3;Meets D.O.T. FMVSS571.106;Meets SAE J2494 & SAE J2494-3
Compatible tubingSAE J844 Type A & B nylon tubing
Reference Part No.AQ66DOT - 66PMT - 1866 - DQ66DOT - 1566DOT

Dimensions are reference data — please confirm at inquiry.

Size table — DOT Air Line Connectors1

PART#Tube O.D×Male NPTFCL
1566-DOT-4A1/4×1/89/161.23
1566-DOT-4B1/4×1/43/41.42
1566-DOT-6B3/8×1/43/41.30
1566-DOT-6C3/8×3/87/81.41
1566-DOT-8C1/2×3/87/81.51
1566-DOT-8D1/2×1/21-1/81.73

Dimensions are reference data — please confirm at inquiry.

Features
  • Connects a line end to its port in one piece
  • Ends: Push-in tube socket × threaded port end
  • The all-brass body and collet grip SAE J844 nylon tube over a stainless support, with a Buna-N seal — push in to seal, pull the collet to release for service.
  • Buna-N O-ring seal
  • This page covers DOT Air Line Connectors1 (1566) — select its size above and that exact variant is carried into the inquiry
Applications

DOT Air Line Connectors1 — It connects a line end to its port in one piece, in the form its name describes. In WAVE's DOT Push-In (Brass) family it serves: Tractor and trailer air lines · valves and air tanks · brake chambers · frame-to-axle runs · dash controls.

Compatible tubing

For DOT Air Line Connectors1, the compatible line is: SAE J844 Type A & B nylon air brake tubing, 1/4″–3/4″ O.D.. The tube end of this connector takes that line (1/4″ – 3/4″); the threaded end (NPTF 1/8″ – 1/2″) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: the 1562-DOT family is published with AQ62DOT · 62PMT · 1862 · DQ62DOT — check your number in the cross-reference. “Replacement for” describes fit and function only.

Related products — same family

← Back to DOT Push-In Fittings (Brass)