Request a Quote

Home / Products / DOT Push-In Fittings (Brass) / D.O.T Fix female Run Tee

D.O.T Fix female Run Tee — representative product photo, full product on white background
DOT Push-In (Brass)

D.O.T Fix female Run Tee

Brass / composite programme · Built to FMVSS 571.106 · SAE J2494 · for SAE J844 Type A & B nylon tubing.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

DOT Brake Fittings Tee1 is a tee in WAVE's DOT Push-In (Brass) family. It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. The all-brass body and collet grip SAE J844 nylon tube over a stainless support, with a Buna-N seal — push in to seal, pull the collet to release for service. It is threadless — its ends take 1/4″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: 250 psi, −40°F to +200°F. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — DOT Brake Fittings Tee1
ModelTo be confirmed at inquiry
ConfigurationTee
EndsPush-in tube socket × 3
Tube size range1/4″ – 3/4″
StatusTo be confirmed at inquiry

Dimensions are reference data — please confirm at inquiry.

Size variants — DOT Brake Fittings Tee1

Variant (PART# · size)Tube O.D.Working pressureTemperature
1/4″ tube1/4″250 psi−40°F to +200°F
3/8″ tube3/8″250 psi−40°F to +200°F
1/2″ tube1/2″250 psi−40°F to +200°F
5/8″ tube5/8″250 psi−40°F to +200°F
3/4″ tube3/4″250 psi−40°F to +200°F

How to read these tables: variants are tabled by structure. Tube-to-tube variants — unions, tees, elbows and the other threadless forms — are listed with tube size, working pressure and temperature only: there is no Thread column, because there is no thread to list. A Thread column appears only on variants that actually carry one — male, female or bulkhead. Pick the row on the product page and that exact size is carried into your inquiry. On the live site, every row also carries its C (wrench flats) and L (overall length) dimensions from the factory drawing, with every column defined on the page; per-model dimension values are WAVE factory-catalogue data, confirmed with your quotation.

Dimensions are reference data — please confirm at inquiry.

No per-model dimension table is published for this fitting yet — dimensions are confirmed at inquiry.

Features
  • Three ports — a run and a branch — so one line can feed two
  • Ends: Push-in tube socket × 3 — threadless: no thread anywhere on this part
  • The all-brass body and collet grip SAE J844 nylon tube over a stainless support, with a Buna-N seal — push in to seal, pull the collet to release for service.
  • Buna-N O-ring seal
  • This page covers DOT Brake Fittings Tee1 — select its size above and that exact variant is carried into the inquiry
Applications

DOT Brake Fittings Tee1 — It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. In WAVE's DOT Push-In (Brass) family it serves: Tractor and trailer air lines · valves and air tanks · brake chambers · frame-to-axle runs · dash controls.

Compatible tubing

For DOT Brake Fittings Tee1, the compatible line is: SAE J844 Type A & B nylon air brake tubing, 1/4″–3/4″ O.D.. Every end of this tee takes that line directly (1/4″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: the 1562-DOT family is published with AQ62DOT · 62PMT · 1862 · DQ62DOT — check your number in the cross-reference. “Replacement for” describes fit and function only.

Related products — same family

← Back to DOT Push-In Fittings (Brass)