- Three ports — a run and a branch — so one line can feed two
- Ends: Compression tube end (nut & sleeve) × 3 — threadless: no thread anywhere on this part
- The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade.
- Mechanical seal — no flaring, no soldering
- This page covers Brass Compression Tees1 — select its size above and that exact variant is carried into the inquiry
Home / Products / Compression Fittings / Brass Compression Tees1

Brass Compression Tees1
About this fitting
Brass Compression Tees1 is a tee in WAVE's Compression family. It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade. It is threadless — its ends take 1/8″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: By tubing used — confirmed at inquiry, By tubing used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Brass Compression Tees1 | |
|---|---|
| Model | To be confirmed at inquiry |
| Configuration | Tee |
| Ends | Compression tube end (nut & sleeve) × 3 |
| Tube size range | 1/8″ – 3/4″ |
| Status | To be confirmed at inquiry |
Size variants — Brass Compression Tees1
| Variant (PART# · size) | Tube O.D. | Working pressure | Temperature |
|---|---|---|---|
| 1/8″ tube | 1/8″ | By tubing used — confirmed at inquiry | By tubing used — confirmed at inquiry |
| 1/4″ tube | 1/4″ | By tubing used — confirmed at inquiry | By tubing used — confirmed at inquiry |
| 3/8″ tube | 3/8″ | By tubing used — confirmed at inquiry | By tubing used — confirmed at inquiry |
| 1/2″ tube | 1/2″ | By tubing used — confirmed at inquiry | By tubing used — confirmed at inquiry |
| 5/8″ tube | 5/8″ | By tubing used — confirmed at inquiry | By tubing used — confirmed at inquiry |
| 3/4″ tube | 3/4″ | By tubing used — confirmed at inquiry | By tubing used — confirmed at inquiry |
How to read these tables: variants are tabled by structure. Tube-to-tube variants — unions, tees, elbows and the other threadless forms — are listed with tube size, working pressure and temperature only: there is no Thread column, because there is no thread to list. A Thread column appears only on variants that actually carry one — male, female or bulkhead. Pick the row on the product page and that exact size is carried into your inquiry. On the live site, every row also carries its C (wrench flats) and L (overall length) dimensions from the factory drawing, with every column defined on the page; per-model dimension values are WAVE factory-catalogue data, confirmed with your quotation.



