Request a Quote

Home / Products / Compression Fittings / Brass Bulkhead Union Compression Fittings

Brass Bulkhead Union Compression Fittings — representative product photo, full product on white background
Compression

Brass Bulkhead Union Compression Fittings

74 · Brass / composite programme · Brass compression programme · SAE J246 flare/compression practice.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Compression Coupling1 is a coupling in WAVE's Compression family. It joins two tube ends in a straight line so a run can be extended, or a section replaced, without remaking the whole line. The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade. It is threadless — its ends take 1/8″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: By tubing used — confirmed at inquiry, By tubing used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Compression Coupling1
Model74
FeaturesMeets functional requirements of SAE J-512; UL Listed for flammable liquid; Brass or acetal sleeve available; No tube preparation; Forged and extruded shapes
MaterialBrass (brass or acetal sleeve available)
StandardSAE J-512; UL Listed for flammable liquid;Meets functional requirements of SAE J-512
Reference Part No.62BH - 274 - 75

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Compression Coupling1

PART#TUBE SIZE O.DCMD
74-41/47/161.75.188
74-63/811/161.88.312

Dimensions are reference data — please confirm at inquiry.

Features
  • Joins two ends in a straight line so a run can be extended or a section replaced
  • Ends: Compression tube end (nut & sleeve) × Compression tube end (nut & sleeve) — threadless: no thread anywhere on this part
  • The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade.
  • Mechanical seal — no flaring, no soldering
  • This page covers Brass Compression Coupling1 (74) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Compression Coupling1 — It joins two tube ends in a straight line so a run can be extended, or a section replaced, without remaking the whole line. In WAVE's Compression family it serves: Air, water and low-pressure hydraulic lines · instrumentation · lubrication lines · workshop air.

Compatible tubing

For Brass Compression Coupling1, the compatible line is: Copper, nylon and plastic tubing, 1/8″–3/4″ O.D.. Every end of this coupling takes that line directly (1/8″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Compression Fittings