Request a Quote

Home / Products / Compression Fittings / Compression Fittings Male Branch Tee

Compression Fittings Male Branch Tee — representative product photo, full product on white background
Compression

Compression Fittings Male Branch Tee

72 · Brass / composite programme · Brass compression programme · SAE J246 flare/compression practice.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Compression Brass Tees1 is a tee in WAVE's Compression family. It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade. It is threadless — its ends take 1/8″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: By tubing used — confirmed at inquiry, By tubing used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Compression Brass Tees1
Model72
FeaturesMeets functional requirements of SAE J-512; UL Listed for flammable liquid; Brass or acetal sleeve available; No tube preparation; Forged and extruded shapes
MaterialBrass (brass or acetal sleeve available)
StandardSAE J-512; UL Listed for flammable liquid;Meets functional requirements of SAE J-512
Reference Part No.72 - 172C - S72 - 72A

Dimensions are reference data — please confirm at inquiry.

Size table — Compression Brass Tees1

PART#TUBE O.D× MALE NPTFMND
72-3A3/16×1/8.63.69.125
72-4A1/4×1/8.63.75.188
72-4B1/4×1/4.69.88.188
72-5A5/16×1/8.72.75.250
72-5B5/16×1/4.75.88.250
72-6A3/8×1/8.75.75.312
72-6B3/8×1/4.79.87.312
72-6C3/8×3/8.881.00.330
72-8C1/2×3/8.941.09.406
72-8D1/2×1/2.971.19.406
72-10D5/8×1/21.061.31.500

Dimensions are reference data — please confirm at inquiry.

Features
  • Three ports — a run and a branch — so one line can feed two
  • Ends: Compression tube end (nut & sleeve) × 3 — threadless: no thread anywhere on this part
  • The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade.
  • Mechanical seal — no flaring, no soldering
  • This page covers Compression Brass Tees1 (72) — select its size above and that exact variant is carried into the inquiry
Applications

Compression Brass Tees1 — It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. In WAVE's Compression family it serves: Air, water and low-pressure hydraulic lines · instrumentation · lubrication lines · workshop air.

Compatible tubing

For Compression Brass Tees1, the compatible line is: Copper, nylon and plastic tubing, 1/8″–3/4″ O.D.. Every end of this tee takes that line directly (1/8″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Compression Fittings