- Three ports — a run and a branch — so one line can feed two
- Ends: Compression tube end (nut & sleeve) × 3 — threadless: no thread anywhere on this part
- The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade.
- Mechanical seal — no flaring, no soldering
- This page covers Compression Brass Tee1 (71) — select its size above and that exact variant is carried into the inquiry
Home / Products / Compression Fittings / Brass Male Run Tee Compression Fittings

Brass Male Run Tee Compression Fittings
About this fitting
Compression Brass Tee1 is a tee in WAVE's Compression family. It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade. It is threadless — its ends take 1/8″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: By tubing used — confirmed at inquiry, By tubing used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Compression Brass Tee1 | |
|---|---|
| Model | 71 |
| Features | Meets functional requirements of SAE J-512; UL Listed for flammable liquid; Brass or acetal sleeve available; No tube preparation; Forged and extruded shapes |
| Material | Brass (brass or acetal sleeve available) |
| Standard | SAE J-512; UL Listed for flammable liquid;Meets functional requirements of SAE J-512 |
| Reference Part No. | 71 - 171c - 71A - S71 |
Size table — Compression Brass Tee1
| PART# | TUBE O.D×MALE NPTF | M | N | D |
|---|---|---|---|---|
| 71-3A | 3/16×1/8 | .63 | .69 | .125 |
| 71-4A | 1/4×1/8 | .63 | .75 | .188 |
| 71-4B | 1/4×1/4 | .69 | .88 | .188 |
| 71-5A | 5/16×1/8 | .72 | .75 | .250 |
| 71-5B | 5/16×1/4 | .75 | .88 | .250 |
| 71-6A | 3/8×1/8 | .75 | .75 | .312 |
| 71-6B | 3/8×1/4 | .79 | .87 | .312 |
| 71-6C | 3/8×3/8 | .88 | 1.00 | .330 |
| 71-8C | 1/2×3/8 | .94 | 1.09 | .406 |
| 71-8D | 1/2×1/2 | .97 | 1.19 | .406 |
| 71-10D | 5/8×1/2 | 1.06 | 1.31 | .500 |



