Request a Quote

Home / Products / Compression Fittings / Compression Tubing Female Connector

Compression Tubing Female Connector — representative product photo, full product on white background
Compression

Compression Tubing Female Connector

66 · Brass / composite programme · Brass compression programme · SAE J246 flare/compression practice.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Compression Brass Adapters1 is a adapter in WAVE's Compression family. It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade. It is made for 1/8″ – 3/4″ tube, with a threaded end in the NPT 1/8″ – 1/2″ range. Family working range: By tubing used — confirmed at inquiry, By tubing used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Compression Brass Adapters1
Model66
FeaturesMeets functional requirements of SAE J-512; UL Listed for flammable liquid; Brass or acetal sleeve available; No tube preparation; Forged and extruded shapes
MaterialBrass (brass or acetal sleeve available)
StandardSAE J-512; UL Listed for flammable liquid (Ref.SAE.No 060103BA);Meets functional requirements of SAE J-512
Reference Part No.66 - S66 - 66A

Dimensions are reference data — please confirm at inquiry.

Size table — Compression Brass Adapters1

PRT#TUBE O.D × FEMLAE NPTFCMD
66-2A1/8×1/89/16.75.940
66-3A3/16×1/89/16.78.125
66-4A1/4×1/811/16.78.188
66-4B1/4×1/411/161.03.188
66-5A5/16×1/89/16.81.234
66-5B5/16×1/411/161.03.250
66-6A3/8×1/89/16.84.312
66-6B3/8×1/411/161.06.312
66-6C3/8×3/813/161.03.312
66-6D3/8×1/21''1.12.312
66-8B1/2×1/411/161.09.312
66-8C1/2×3/813/161.25.406
66-8D1/2×1/21''1.03.406
66L-8D1/2×1/21''1.38.406
66-8E1/2×3/41-3/161.20.656
66-10C5/8× 3/813/161.25.406
66-10D5/8×1/21''1.03.500
66L-10D5/8×1/21''1.20.500
66-12D3/4×1/21-1/81.25.562
66-12E3/4×3/41-1/161.28.656

*Ref.SAE.No 060103BA

Dimensions are reference data — please confirm at inquiry.

Features
  • Bridges a line end and a threaded port in one piece
  • Ends: Compression tube end (nut & sleeve) × threaded port end
  • The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade.
  • Mechanical seal — no flaring, no soldering
  • This page covers Compression Brass Adapters1 (66) — select its size above and that exact variant is carried into the inquiry
Applications

Compression Brass Adapters1 — It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. In WAVE's Compression family it serves: Air, water and low-pressure hydraulic lines · instrumentation · lubrication lines · workshop air.

Compatible tubing

For Compression Brass Adapters1, the compatible line is: Copper, nylon and plastic tubing, 1/8″–3/4″ O.D.. The tube end of this adapter takes that line (1/8″ – 3/4″); the threaded end (NPT 1/8″ – 1/2″) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Compression Fittings