Request a Quote

Home / Products / Push-On Hose Fittings / Brass Female Connector Inverted Flare Female Adapter1

Brass Female Connector Inverted Flare Female Adapter1 — representative product photo, full product on white background
Push-On

Brass Female Connector Inverted Flare Female Adapter1

Brass / composite programme · Brass push-on programme · for push-on (no-clamp) hose.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Female Connector Inverted Flare Female Adapter1 is a adapter in WAVE's Push-On family. It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a female thread in the NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Female Connector Inverted Flare Female Adapter1
ModelTo be confirmed at inquiry
ConfigurationAdapter
EndsHose barb end × female thread
Hose I.D. rangeHose I.D. 1/4″ – 3/4″
ThreadFemale thread — NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels
StatusTo be confirmed at inquiry

Dimensions are reference data — please confirm at inquiry.

Size variants — Brass Female Connector Inverted Flare Female Adapter1

Variant (PART# · size)Hose I.D.ThreadWorking pressureTemperature
3/8″ hose × 1/4 NPT3/8″ hose1/4 NPTBy hose used — confirmed at inquiryBy hose used — confirmed at inquiry
1/2″ hose × 3/8 NPT1/2″ hose3/8 NPTBy hose used — confirmed at inquiryBy hose used — confirmed at inquiry
1/2″ hose × 1/2 NPT1/2″ hose1/2 NPTBy hose used — confirmed at inquiryBy hose used — confirmed at inquiry

How to read these tables: variants are tabled by structure. Tube-to-tube variants — unions, tees, elbows and the other threadless forms — are listed with tube size, working pressure and temperature only: there is no Thread column, because there is no thread to list. A Thread column appears only on variants that actually carry one — male, female or bulkhead. Pick the row on the product page and that exact size is carried into your inquiry. On the live site, every row also carries its C (wrench flats) and L (overall length) dimensions from the factory drawing, with every column defined on the page; per-model dimension values are WAVE factory-catalogue data, confirmed with your quotation.

Dimensions are reference data — please confirm at inquiry.

No per-model dimension table is published for this fitting yet — dimensions are confirmed at inquiry.

Features
  • Bridges a line end and a threaded port in one piece
  • Ends: Hose barb end × female thread
  • The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
  • No clamp or ferrule needed
  • This page covers Brass Female Connector Inverted Flare Female Adapter1 — select its size above and that exact variant is carried into the inquiry
Applications

Brass Female Connector Inverted Flare Female Adapter1 — It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. In WAVE's Push-On family it serves: Low-pressure push-on hose lines · air and fluid transfer in workshop and fleet service.

Compatible tubing

For Brass Female Connector Inverted Flare Female Adapter1, the compatible line is: Push-on (no-clamp) hose, 1/4″–3/4″ I.D.. The hose end of this adapter takes that line (Hose I.D. 1/4″ – 3/4″); the threaded end (NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Push-On Hose Fittings