Request a Quote

Home / Products / SAE Pipe Fittings & 45° Flare / Pipe Fittings Union Brass fittings

Pipe Fittings Union Brass fittings — representative product photo, full product on white background
SAE Pipe & 45° Flare

Pipe Fittings Union Brass fittings

3250 · Brass / composite programme · Brass pipe programme · SAE 45° flare to SAE J512 / J246 practice.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Pipe Union Fittings1 is a union in WAVE's SAE Pipe & 45° Flare family. It joins two tube ends in a straight line so a run can be extended, or a section replaced, without remaking the whole line. The connection is made on the thread (or the 45° flare seat) itself — the threaded backbone joint used on tank, valve and manifold ports. It is threadless — its ends take Flare tube 1/4″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: By application — confirmed at inquiry, By application — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Pipe Union Fittings1
Model3250
FeaturesAll brass construction; Meets functional requirements of SAE J530 and SAE J531; Threads made to dryseal standards; Both forgings and extrusions available
MaterialBrass (all brass construction)
StandardSAE J530, SAE J531; ASA, ASME, SAE;Meets functional requirements of SAE J530 and SAE J531
Compatible tubingCopper;Brass;Iron Pipe
Reference Part No.3250 - 212P - 104A - 104B
Working pressureUp to 1000 psi
Working temperature-65˚ to +250˚F

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Pipe Union Fittings1

PART#Thread SizeCL
3250-A1/815/161.19
3250-B1/41-1/161.31
3250-C3/81-1/41.75
3250-D1/21-9/161.79

* L:Light

Dimensions are reference data — please confirm at inquiry.

Features
  • Joins two tube ends in a straight line so a run can be extended or a section replaced
  • Ends: Flare tube end × Flare tube end — threadless: no thread anywhere on this part
  • The connection is made on the thread (or the 45° flare seat) itself — the threaded backbone joint used on tank, valve and manifold ports.
  • Street elbows, tees, crosses and wyes
  • This page covers Brass Pipe Union Fittings1 (3250) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Pipe Union Fittings1 — It joins two tube ends in a straight line so a run can be extended, or a section replaced, without remaking the whole line. In WAVE's SAE Pipe & 45° Flare family it serves: Threaded ports on tanks, valves and manifolds · flared tube lines · the pipe-fitting wall of every US truck shop.

Compatible tubing

For Brass Pipe Union Fittings1, the compatible line is: NPT pipe 1/8″–1/2″ · flared tube 1/4″–3/4″ O.D.. Every end of this union takes that line directly (Flare tube 1/4″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to SAE Pipe Fittings & 45° Flare