- Bridges a line end and a threaded port in one piece
- Ends: Hose barb end × male thread
- The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
- No clamp or ferrule needed
- This page covers Brass Flare Fittings Male SAE Thread Adapter1 (282) — select its size above and that exact variant is carried into the inquiry
Home / Products / Push-On Hose Fittings / 282 Male Sae 45° Flaer Adapter

Push-On
282 Male Sae 45° Flaer Adapter
About this fitting
Brass Flare Fittings Male SAE Thread Adapter1 is a adapter in WAVE's Push-On family. It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a male thread in the NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Brass Flare Fittings Male SAE Thread Adapter1 | |
|---|---|
| Model | 282 |
| Material | Brass or stainless steel (page states both; not specified per variant) |
| Reference Part No. | 100b-3 - ka-ms - 727 - 282 - 302 - 682 - 945 |
| Working pressure | Limited by hose l.D |
Size table — Brass Flare Fittings Male SAE Thread Adapter1
| PART# | HOSE I.D×SAE45 ° MALE FLARE | C | M | L |
|---|---|---|---|---|
| 282-4-4 | 1/4×7/16-20UNF | 7/16 | .77 | 1.45 |
| 282-4-5 | 1/4×1/2-20UNF | 1/2 | .77 | 1.59 |
| 282-5-5 | 5/16×1/2-20UNF | 1/2 | .80 | 1.60 |
| 282-6-4 | 3/8×7/16-20UNF | 1/2 | .86 | 1.64 |
| 282-6-6 | 3/8×5/8-18UNF | 5/8 | .92 | 1.83 |
| 282-8-8 | 1/2×3/4-16UNF | 3/4 | 1.02 | 2.04 |
| 282-10-10 | 5/8×7/8-14UNF | 7/8 | 1.50 | 2.73 |
| 282-12-12 | 3/4×1"1/16-14UNF | 1"-1/16 | 1.50 | 2.98 |
Features
Applications
Compatible tubing



