Request a Quote

Home / Products / DOT Nylon Tubing Fittings / Brass Insert

Brass Insert — representative product photo, full product on white background
DOT Nylon Tubing

Brass Insert

1484 · Brass / composite programme · Built to FMVSS 571.106 · SAE J1131 · for SAE J844 Type A & B nylon tubing.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

DOT Fitting Tube Inserts2 is a tube insert in WAVE's DOT Nylon Tubing family. It slides inside the nylon tube under the ferrule, supporting the tube wall so the compression joint cannot collapse or creep. A component, ordered for the tube it supports. The brass nut and sleeve compress onto the nylon tube over a supporting insert, making a mechanical joint that can be undone and remade with a wrench. It is a component of the family's compression joint, sized by the tube it serves: 1/4″ – 3/4″. Family working range: 150 psi, −40°F to +200°F. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — DOT Fitting Tube Inserts2
Model1484
FeaturesBrass Body; Meets D.O.T. FMVSS571.106 Performance; Meets functional Requirements SAE J246 & SAE J1131; Pre-applied Thread Sealant
MaterialBrass body
StandardDOT FMVSS571.106; SAE J246 & SAE J1131;Meets D.O.T. FMVSS571.106 Performance;Meets functional Requirements SAE J246 & SAE J1131

Dimensions are reference data — please confirm at inquiry.

Size table — DOT Fitting Tube Inserts2

PART#TUBE O. DLO.D
1484-41/4.53.163
1484-63/8.64.245
1484-81/2.81.370
1484-105/8.86.434
1484-123/41.04.559

Dimensions are reference data — please confirm at inquiry.

Features
  • Slides inside the tube and supports its wall under the ferrule
  • Ends: Component — slides inside the tube, under the compression sleeve — threadless: no thread anywhere on this part
  • The brass nut and sleeve compress onto the nylon tube over a supporting insert, making a mechanical joint that can be undone and remade with a wrench.
  • Tube insert supports the nylon wall under the ferrule
  • This page covers DOT Fitting Tube Inserts2 (1484) — select its size above and that exact variant is carried into the inquiry
Applications

DOT Fitting Tube Inserts2 — It slides inside the nylon tube under the ferrule, supporting the tube wall so the compression joint cannot collapse or creep. A component, ordered for the tube it supports. In WAVE's DOT Nylon Tubing family it serves: Tractor and trailer nylon air lines · air tanks and valves · brake chambers · bulkhead pass-throughs at the trailer frame.

Compatible tubing

For DOT Fitting Tube Inserts2, the compatible line is: SAE J844 Type A & B nylon air brake tubing, 1/4″–3/4″ O.D.. This component is sized by that tube (1/4″ – 3/4″) — order it for the tube it serves.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to DOT Nylon Tubing Fittings