- Turns the line through 45° where a right angle would kink the tube
- Ends: As photographed — the exact end configuration is confirmed at inquiry — threadless: no thread anywhere on this part
- The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration.
- Rigid and swivel ends
- This page covers Brass Flare Fittings SAE 45 (142) — select its size above and that exact variant is carried into the inquiry
Home / Products / Hose Barb Fittings / 142 45° Flare Adapter

Hose Barb
142 45° Flare Adapter
About this fitting
Brass Flare Fittings SAE 45 is a 45° elbow in WAVE's Hose Barb family. It turns the line through 45° instead of a sharp right angle — used where the run changes direction gradually or a 90° elbow would kink the tube. The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration. It is threadless — its ends take Hose I.D. 1/4″ – 3/4″ hose directly, with no thread anywhere on the part. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Brass Flare Fittings SAE 45 | |
|---|---|
| Model | 142 |
| Features | All brass construction; Fluorocarbon O-rings; NPTF, SAE straight thread, metric thread ends; Reusable; Clamp required |
| Material | Brass; fluorocarbon O-rings |
| Compatible tubing | Rubber Hose;GPH Hose |
| Reference Part No. | 142 - 201BF - FK-MS - KDS |
Size table — Brass Flare Fittings SAE 45
| PART# | HOSE I.D×45° Flare | C | D | M | L |
|---|---|---|---|---|---|
| 142-3-4 | 3/16×1/4(7/16-20) | 7/16 | .125 | .75 | 1.50 |
| 142-4-4 | 1/4×1/4(7/16-20) | 7/16 | .187 | .97 | 1.72 |
| 142-4-6 | 1/4×3/8(5/8-18) | 5/8 | .187 | .97 | 1.82 |
| 142-5-5 | 5/16×5/16(1/2-20) | 1/2 | .250 | .97 | 1.75 |
| 142-6-6 | 3/8×3/8(5/8-18) | 5/8 | .281 | .97 | 1.82 |
| 142-6-8 | 3/8×1/2(3/4-16) | 3/4 | .281 | .97 | 1.97 |
| 142-8-8 | 1/2×1/2(3/4-16) | 3/4 | .415 | .97 | 1.97 |
Features
Applications
Compatible tubing



