- Bridges a line end and a threaded port in one piece
- Ends: Hose barb end × male thread
- The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration.
- Rigid and swivel ends
- This page covers Brass Pipe Fittings Ballseat Male Adapter1 (127) — select its size above and that exact variant is carried into the inquiry
Home / Products / Hose Barb Fittings / 127 Ball-End Joint Adapter to Male Pipe

Hose Barb
127 Ball-End Joint Adapter to Male Pipe
About this fitting
Brass Pipe Fittings Ballseat Male Adapter1 is a adapter in WAVE's Hose Barb family. It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a male thread in the NPT / NPTF 1/8″ – 1/2″ range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Brass Pipe Fittings Ballseat Male Adapter1 | |
|---|---|
| Model | 127 |
| Features | All brass construction; Fluorocarbon O-rings; NPTF, SAE straight thread, metric thread ends; Reusable; Clamp required |
| Material | Brass; fluorocarbon O-rings |
| Compatible tubing | Rubber Hose;GPH Hose |
| Reference Part No. | 172 - 134 - 127HB - 122AS |
Size table — Brass Pipe Fittings Ballseat Male Adapter1
| PART# | NPSM × MALE NPTF | C | D | L |
|---|---|---|---|---|
| 127-4A | 1/4×1/8 | 9/16 | .219 | .91 |
| 127-4B | 1/4×1/4 | 9/16 | .281 | 1.02 |
| 127-6B | 3/8×1/4 | 11/16 | .312 | 1.02 |
| 127-6C | 3/8×3/8 | 11/16 | .406 | 1.09 |
| 127-8C | 1/2×3/8 | 7/8 | .406 | 1.19 |
| 127-8D | 1/2×1/2 | 7/8 | .531 | 1.39 |
Features
Applications
Compatible tubing



