Request a Quote

Home / Products / Hose Barb Fittings / 125S Male Swivel Hose Barb

125S Male Swivel Hose Barb — representative product photo, full product on white background
Hose Barb

125S Male Swivel Hose Barb

125S · Brass / composite programme · Brass hose-end programme · swivel ends to JIC 37° / SAE 45° practice.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Fittings Plumbing Swivel Male Adapter1 is a swivel adapter in WAVE's Hose Barb family. The swivel end lets the nut turn while the body stays put, so the joint can be tightened without twisting the hose or tube behind it. The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a male thread in the NPT / NPTF 1/8″ – 1/2″ range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Fittings Plumbing Swivel Male Adapter1
Model125S
FeaturesAll brass construction; Fluorocarbon O-rings; NPTF, SAE straight thread, metric thread ends; Reusable; Clamp required
MaterialBrass; fluorocarbon O-rings
Compatible tubingRubber Hose;GPH Hose
Reference Part No.125HBLSV - 32329~32386

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Fittings Plumbing Swivel Male Adapter1

PART#Hose I.D × TharedCDML
125S-4A1/4×1/89/16.281.972.12
125S-4B1/4×1/411/16.281.972.12
125S-6A3/8×1/89/16.375.972.12
125S-6B3/8×1/411/16.375.972.12
125S-8C1/2×3/811/16.406.972.14
125S-8D1/2×1/27/8.406.972.33
125S-12E3/4×3/41-1/16.562.972.33

Dimensions are reference data — please confirm at inquiry.

Features
  • The swivel end turns while the body stays put, so the line behind it is not twisted
  • Ends: Hose barb end × male thread
  • The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration.
  • Rigid and swivel ends
  • This page covers Brass Fittings Plumbing Swivel Male Adapter1 (125S) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Fittings Plumbing Swivel Male Adapter1 — The swivel end lets the nut turn while the body stays put, so the joint can be tightened without twisting the hose or tube behind it. In WAVE's Hose Barb family it serves: Rubber air and water hose · welding hose · workshop and fleet hose assemblies.

Compatible tubing

For Brass Fittings Plumbing Swivel Male Adapter1, the compatible line is: Rubber hose, 1/4″–3/4″ I.D. — clamp joint. The hose end of this swivel adapter takes that line (Hose I.D. 1/4″ – 3/4″); the threaded end (NPT / NPTF 1/8″ – 1/2″) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Hose Barb Fittings