- Turns the line through 90° in a compact body
- Ends: Hose barb end × Hose barb end — threadless: no thread anywhere on this part
- The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration.
- Rigid and swivel ends
- This page covers Brass Hose Elbow 90 (122) — select its size above and that exact variant is carried into the inquiry
Home / Products / Hose Barb Fittings / 122 Brass Hose Barb Fitting 90° Elbow

Hose Barb
122 Brass Hose Barb Fitting 90° Elbow
About this fitting
Brass Hose Elbow 90 is a elbow in WAVE's Hose Barb family. It turns the line through 90° in a compact body, so a run can change direction in the tight space behind a valve or under a trailer frame. The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration. It is threadless — its ends take Hose I.D. 1/4″ – 3/4″ hose directly, with no thread anywhere on the part. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Brass Hose Elbow 90 | |
|---|---|
| Model | 122 |
| Features | All brass construction; Fluorocarbon O-rings; NPTF, SAE straight thread, metric thread ends; Reusable; Clamp required |
| Material | Brass; fluorocarbon O-rings |
| Compatible tubing | Rubber Hose;GPH Hose |
| Reference Part No. | 32429~32436 |
Size table — Brass Hose Elbow 90
| PART# | HOSE I.D × HOSE I.D | C | D | M | L |
|---|---|---|---|---|---|
| 122-3 | 3/16 | 5/16 | .125 | .69 | 1.44 |
| 122-4 | 1/4 | 3/8 | .187 | .97 | 2.00 |
| 122-5 | 5/16 | 7/16 | .250 | .97 | 2.00 |
| 122-6 | 3/8 | 1/2 | .281 | .97 | 2.00 |
| 122-8 | 1/2 | 5/8 | .375 | .97 | 2.00 |
| 122-10 | 5/8 | 3/4 | .530 | .97 | 2.00 |
| 122-12 | 3/4 | 7/8 | .790 | 1.15 | 2.50 |
Features
Applications
Compatible tubing



